Thrasher Foundation Repair Before & After Photos

Wall brace and beam solutions are used to repair bowing, buckling, or significant cracks in foundation walls. These walls now have the support needed to maintain a firm structure for the home. See how our solutions can help you!

These front steps were sinking due to water getting underneath the concrete slab and making the soil swell. To permanently fix this problem, we raised the slabs back in place and then sealed the joint and cracks around the area. We used a polymer foam to raise the slab back up to help stabilize it. The foam is waterproof and is installed under high pressure which allows it to lift effortlessly. We then used a silicone joint and crack repair caulk to seal all cracks and joints. 

This home had an old stone foundation that was leaking water due to the grout falling apart. Water was entering through the walls and cold joint where the floor meets the bottom of the wall. To fix this issue, we installed an interior draining system to control and redirect the water away from the home. We also attached a vapor barrier to the wall to keep the walls 100% dry and clean. We also installed a trench guard system around the HVAC and the water heater. 

This home had several water issues that caused the foundation to settle. To control and redirect the water, we installed an interior draining system and then installed piers to permanently stabilize the foundation.

This homeowner had serious problems with their foundation walls rotting which affected the structure of their house. Many people and contractors often just try to fix the wood rot without dealing with the main issue. In this case, too much moisture and humidity caused mold to grow and the wood to deteriorate.  We used a combination of sealing and dehumidifying methods to control the moisture. Our team installed a vapor barrier in the crawl space and a self-draining dehumidifier to remove extra moisture and prevent damage in the future.